Showing posts with label Levitation. Show all posts
Showing posts with label Levitation. Show all posts

How to Take Great Levitation Photos and Trick Photography by Reducing Motion Blur

The most common way to destroy a great levitation photo when you're doing trick photography is to take a blurry photo of the floating subject. The trick is to remove any tell-tale signs of how the effect is achieved. Any blurring especially on body parts like hands and legs is undesirable unless you can use it to further confuse the viewer. That is why you will notice that the subject (levitating objects or people) are always ultra-sharp in the best levitation photos. So the following are some ideas on how to avoid taking blurry photos that can hinder your levitation effect.

Motion blur

In most cases the blurring is due to camera or subject motion. This is important because if you're attempting to take a levitation photo by jumping, you are making a lot of movement in a short time frame. Not only that, if you held the camera by hand, you'll also be introducing more blurring. All of us have the experience of shooting photos just to find that they look blurry. If you use a telephoto lens then the problem is compounded when you zoom in.

Usually movements are small and for that reason in high shutter speeds the camera or subject does not have an opportunity to move enough to cause blurring. But if your camera shutter speed is low, even the tiniest movement will result in blurring. So if you're planning to take levitation photos indoor or in low light conditions which requires a slower shutter speed, then you have to be extra careful with blurring.

Reducing camera motion

Most people take photos when the camera is held in their hands. The hand is an unstable platform and tends to move quite a bit. Fully stretch your hand forward and hold it there for a few minutes and you'll see what I mean. Our cameras have also gotten lighter and smaller every year, making it that much harder to keep it stable. To remedy this, you need a firm and comfortable grip and support yourself or the camera against something solid. We tend to forget that the picture is taken the moment you push the button, so if you push too hard or slam that button with your finger you get more movement and blur. Slowly rest your finger on the shutter button and squeeze until you hear the click.

Using a tripod

Even if you have a sniper's steady hand, you will not be able to totally eliminate camera shake if you take levitation photography in low light conditions. As a general rule photos that are taken with slow shutter speeds or high zoom values should be taken using a more stable platform than your hand. It can be anything like a table, shelf, chair, or even a rock. But nothing beats the humble tripod. Tripod comes in many varieties of size, weight, price, height, articulation, and more depending on your budget. But in general you should pick one that is sturdy in construction and simple to use.

Jim blogs about trick photography and special effects techniques that people use to create stunning photographs. You can sign up at his Trick Photography site to receive a free report on the top 10 trick photography ideas for travel photos.


View the original article here

How to Minimize Shutter Delay So You Can Take Better Levitation and Forced Perspective Photography

Being able to capture the perfect shot is important, especially when you're taking levitation photos and forced perspective photos in trick photography. This is because you'll often be trying to capture action events that are spontaneous in nature. Your camera's shutter delay can be annoying because you have to time it just right, or you will miss the shot. Imagine asking your friends to repeatedly jump or hold a pose while you fiddle around with your camera, they won't be so receptive to your great trick photo ideas the next time.

So here are the few things you can do to minimize the shutter delay of your camera.

Almost all modern cameras have a burst mode that shoots a fast series of photos. Higher end cameras like DSLRs allow you to hold down the shutter button to keep shooting continuously, filling up the memory card. Using burst mode you can shoot fast photos of an action event and then choose the one that best captured the events.

Autofocus is a godsend that has allowed us to literally "point and shoot". The camera takes care of the focusing duties to ensure everything stays in sharp focus. The downside is that once awhile it tends to mis-judge what you want and it takes its sweet time doing it. You can reduce this delay by either switching to manual focus, or keep the shutter button half-pressed to keep the current focus locked. Holding the button half way down results in a one-time focus process and a focus lock. So when the action happens the camera won't waste time re-focusing, and you get the shot you want. To some this may sound obvious but the majority of casual camera users are unaware of this.

Another culprit is the "initial delay". Due to battery saving technology, most cameras will enter a standby mode if not used for a certain amount of time. If you switch off your camera, it will take time for it to get ready. The camera turns off most of its electronics like the LCD display if it goes into standby mode. Usually pressing the shutter button will awake the camera from standby, but some cameras have a setting where you can prevent it from going into standby. This is not really an issue if you're capturing pre-meditated trick photo shots, but if its a spontaneous shot then this matters. If you can't prevent it then you can periodically half-press the shutter button to keep it awake when you sense an opportunity shot.

Jim blogs about trick photography and special effects techniques that people use to create stunning photographs. You can sign up at his Trick Photography site to receive a free report on the top 10 trick photography ideas for travel photos.


View the original article here

Why Shutter Delay Can Affect Your Levitation and Forced Perspective Photography

Spontaneous levitation photography often means that you ask the subject to jump and hold a pose, and you try your best to take a photo of them in mid air. Without understanding your camera's shutter delay, you will have to repeat and repeat until you get the perfect shot, not to mention a very tired subject! This goes for forced perspective photos too as your subjects need to maintain an awkward pose until you're able to position the camera and yourself just right.

Among the things that you can do to improve your trick photography skill is to capture sharp photos of your levitating subject. A blurry subject will destroy the illusion of levitation or forced perspective and so you won't be able to "freeze" your subject. But aside from levitation or trick photography, having a better understanding of your camera's shutter delay will definitely improve all your photography efforts.

When you use a digital camera (who doesn't these days?), especially to take action shots you will notice that there is a slight delay between the time you press the shutter button to the time the camera actually takes the photograph. Most of the time this little delay is small and not noticeable, but in action photos this delay can result in a photo that just missed the action. By the end of this article you will have a better understanding of why this is so and how you can overcome it.

A camera's shutter delay is the time gap between you pressing the shutter button to the camera's shutter actually capturing the photo. There is almost no shutter delay in old film cameras as the button is directly connected to the shutter, so it is released as soon as you press it. Digital cameras are a different beast as they're actually powerful computers in your hand that performs a series of steps before actually triggering the shutter.

When you press the shutter button, the camera goes through a series of setup events in order to get all its electronics and mechanical elements ready. Only when these events are finished can the camera capture the photo. Also, when you take subsequent photos there is an additional delay as a result of the camera processing the image and saving it to memory. We're not going to cover the technical intricacies here but suffice to say these steps are designed to help you take better photos in all conditions so it is not actually a step backwards, but the slight delay is still an acceptable trade-off.

The time it takes for the camera to complete these events can vary but is usually around one second or so. It might not seem long but it can make the difference between capturing your shot, missing it entirely, or producing a blurry result.

The other thing you can do to create great levitation and trick photography is to get to know your camera and to get a feeling of the delay it introduces. Master your camera by getting familiar with the way it operates and you will be able to minimize shutter delay. Of course, if the delay is unbearable you could always switch to a higher end professional camera with improved electronics and less shutter delay.

Jim blogs about trick photography and special effects techniques that people use to create stunning photographs. You can sign up at his Trick Photography site to receive a free report on the top 10 trick photography ideas for travel photos.


View the original article here